LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L
LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L
Use this set to mount your cylinder tank or vapor gas tank (cylinder) with a diameter of minimum 27cm and maximum 40cm.
The set comes standard with a tank frame + 2 tank straps, insulation strip, bolts and nuts, a filling connection , a filling hose , a breather hose and bottom breather and various fasteners.
TYPE : Rear set (Tank mounting material) for Cylinder tank or Vapor gas tank (cylinder)
Only suitable for LPG Cylinder tank
Specify for which Type: Filling point, Filling adapters and Filling hose.
Choose your desired filling hose length: from 0.50m - 3.50m
201000250
Use this set to mount your cylinder tank or vapor gas tank (cylinder) with a diameter of minimum 27cm and maximum 40cm.
The set comes standard with a tank frame + 2 tank straps, insulation strip, bolts and nuts, a filling connection , a filling hose , a breather hose and bottom breather and various fasteners.
TYPE : Rear set (Tank mounting material) for Cylinder tank or Vapor gas tank (cylinder)
Only suitable for LPG Cylinder tank
Specify for which Type: Filling point, Filling adapters and Filling hose.
Choose your desired filling hose length: from 0.50m - 3.50m
LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L
You can order this tank installation set in combination with a matching cylinder tank for mounting your LPG tank or vapor gas cylinder tank (90L until 120L) (with a diameter of minimum 27cm and maximum 40cm). (For larger cylinder tanks see the larger associated tank installation sets)
Set content:
- 1 x Tank frame + insulation strips (we supply a suitable frame for the LPG tank you ordered up to 120L)
- 2 x Tension strap set (4x tension strap incl. mounting brackets and bolts)
- 1 x Filling connection (type of your choice. See options)
- 1 x Filling hose (Desired filling hose length optionsl)
- Filling hose clamps for fixing your filling hose
- Mounting material Bolts, nuts, self-tapping screws, hose clamps
- 1 x Ventilation hose To be connected to the tank box of the LPG tank (LPG built-in)
- 1 x Bottom air vent To connect the vent hose and to be able to carry the gases out through the bottom.
201000250